Description
Comprised of DiLog’s DL9130EV Multifunction Tester and universal DLEV1 Charge Station Adapter Kit, the DiLog DL9130EVKIT 18th Edition Advanced EV Testing Kit is ideal for service engineers offering EV installation.
DiLog DL9130EV 18th Edition Advanced Multifunction Tester Overview
The DiLog DL9130EV Multifunction Tester is DiLog’s most capable multifunction installation tester. It offers a comprehensive selection of measurement functions including Rmax, Zmax, and tests critical to ensuring the safe verification of EVSE charge points. The DiLog DL9130EV Multifunction Tester features the following test and measurement capabilities:
- 6mA pure DC test for RDC-DD verification
- Full EV auto test sequence for verifying the DC protection provided by the EV charger and the type A RCD protection
- Rmax: automatically captures the maximum R1+R2/R2 continuity test reading which is indicated on the secondary display
- Zmax: records the maximum Zs test taken during the measurement period
- Intelligent auto-detecting two- or three-wire high current loop test
- Loop Impedance/PSCC: the unique auto-start RCD-LOC XLT loop test principle will not trip any RCD or RCBO
- Auto start loop and continuity tests with a secondary display to capture the recorded result and a null facility to zero out lead resistance
- Type AC, A, B & selective (S) RCD testing
- Variable RCD test: dial-in bespoke mA values
- Auto RCD testing: trip time, trip current, autotest, and ramp current
- 250V, 500V, and 1000V insulation tests
- Phase to phase loop with phase rotation test: indicates the correct phase sequence
- Phase rotation test: indicates the correct phase sequence
- Integrated socket polarity test
Measurements are indicated on the DiLog DL9130EV Multifunction Tester’s LCD display with a colour-changing RGB screen for indicating PASS/FAIL results.
Finally, the DiLog DL9130EV Multifunction Tester is compliant with BS EN 61557 safety and performance requirements and is fully protected against damage when accidentally connected across phases.
DiLog DLEV1 EVSE Charge Station Kit Overview
The DiLog DLEV1 EVSE Charge Station Kit can be used with the DiLog DL9130EV Multifunction Tester to verify the safety and functionality of EVSE charge points. As it can simulate both Proximity Pilot (PP) and Control Pilot (CP) states, it is suitable for energising free-standing and wall-mounted EV chargers. The DiLog DLEV1 EVSE Charge Station Kit can also simulate PE pre-test, CP error “E”, and PE error, and offers signal output and load connection. It is equipped with a type 1 and type 2 connector plug specifically designed for testing, 4mm input terminals for single- or three-phase connections, and a 13A socket for MFT mains leads or inline load connections.
What’s Included?
- DiLog DL9130EV 18th Edition Advanced EV Multifunction Tester
- DiLog DLEV1 EVSE Charge Station Kit
- Padded Neck Strap
- Mains Lead
- 2m Blue Test Lead
- 2m Red Test Lead
- 2m Green Test Lead
- Blue Crocodile Clip
- Red Crocodile Clip
- Green Crocodile Clip
- Remote Test Probe
- 6x 1.5V Batteries
- Toolbox-Style Carry Case
- Operating Instruction Manual
- UKAS Calibration Certificate Fully Traceable to National Standards
Reviews
There are no reviews yet.