Megger AVO835 1000V Digital Multimeter

£195.00 Ex VAT

The Megger AVO835 Cat IV 600V Digital Multimeter is an industrial multimeter suitable for professionals in the electrical, servicing, technical and engineering sectors. It can measure a wide range of electrical parameters including AC/DC voltage (1000V), AC/DC current (10A), resistance (50MΩ), conductance (60nS), capacitance (20mF), and temperature (-20˚C to 300˚C). It has a basic accuracy of ±0.1% and boasts phase rotation testing, diode testing and continuity testing.

Key Features

  • AC/DC voltage range: 1000V
  • AC/DC current range: 10A
  • Resistance range: 50MΩ
  • Conductance range: 60nS
  • Capacitance range: 20mF
  • Temperature range: -20˚C to 300˚C
  • 0.1% basic accuracy
  • Automatic and manual ranging
  • Phase rotation function
  • Non-contact voltage detection
  • High frequency filter
  • Min/max/average recording
  • IP54 environmental protection rating
  • One-year warranty (three-years when registered)
What’s In The Box?
  • Megger AVO835 Cat IV 600V Digital Multimeter
  • Type K thermocouple
  • Red/black test leads
  • Owners information CD
  • 2 x AA alkaline batteries

Tech Specs

Megger AVO410 Technical Specifications

Note: accuracy is ± (% of reading + number of digits) at 23°C ± 5°C, less than 80% RH

AC/DC Voltage
Range DC Accuracy AC Accuracy
600.0mV ±0.5% + 2 digits 50Hz/60Hz sine wave for 600.0mV range, ± (0.9% + 5 digits) 50 to 500Hz
DC 1000V / AC 750V
Overvoltage Protection DC 1000V or AC
Input Impedance 10MΩ // less than 100pF
CMRR (Common Mode Rejection Ratio/Normal
Mode Rejection Ratio)
VAC: CMRR>60dB at DC, 50Hz/60Hz
VDC: CMRR > 10dB at DC, 50/60Hz
NMRR: >50dB at DC, 50/60Hz
AC Conversion Type AC conversions are AC courple True RMS responding, calibrated to the sine wave input
Note *1 ) The basic accuracy is specified for a sine wave below 4000 counts. Over 4000 counts, add 0.6% to the accuracy. For non-sine waves below 2000 counts, refer to the following for accuracy:

±1.5% addition error for C.F from 1.4 to 3

Crest Factor C.F = peak/rms
AC/DC Current
Range DC Accuracy AC Accuracy
600.0μA ±(1.0% + 2 digits) N/A
6.000A ±(1.5% + 6 dgt) 50Hz – 500Hz *1
Overload Protection A Input: 10A (500V) fast blow fuse
μA Input: 600V rms
*1) AC Conversion Type Conversion type and additional specification are the same AC/DC voltage
Range Accuracy Overload Protection
600.0Ω * 2 ±(0.7% + 2 digits) 600V rms
6.000MΩ ±(1.0% + 2 digits)
60.00MΩ * 1 ±(1.5% + 2 digits)
*1) Less than 20Hz, the sensitivity is 1.5V rms
*2) Max sensitivity <5V AC rms
Range Accuracy
6.000nF ±(1.9%) + 8 digits
Overload Protection 600V rms
* <100 digit of reading rolling
General Specifications
Display 6000 counts, updates 1.5/sec
Polarity Indication Automatic, positive implied, negative indicated
Overrange Indication “OL” or “-OL”
Low Battery Indication Displayed when the battery voltage drops below operating voltage
Auto Power Off Approx 10 minutes
Operating Conditions Non-condensing ≤10 °C,
11 °C ~ 30 °C (≤80% R.H)
31 °C ~ 40 °C (≤75% R.H),
41 °C ~ 50 °C (≤45% R.H)
Storage Temperature -20 to 60°C, 0 to 80% RH when battery removed from meter
Temperature Coefficient 0.15 x (Spec.Acc’y) / °C, <18°C or >28°C
Safety IEC 61010 CAT IV 600V
Power Requirements Standard 9V battery: PP3, NEDA 1604, IEC6422 or JIS006P
Battery Life Alkaline: 300 hours
Dimensions (W x H x D) 76 x 158 x 38mm without holster
82 x 164 x 44mm with holster
Weight 522g


There are no reviews yet.

Be the first to review “Megger AVO835 1000V Digital Multimeter”

Your email address will not be published. Required fields are marked *